VO-BB - 19 YEARS OLD!

[Frank F]

Depending on the requirements and the sound I desire it can be a combination of the following:



AKG 414, Neumann U87, Neumann M149, Electro-Voice RE20, Octava to:



Avalon VT-737SP Microphone Preamp, Focusrite Red 3-Dual Compressor/Limiter to:



Venice 320 32 Channel Mixer to:



MOTU 828 MKII or M-Audio Delta 1010's to:



Sony Vegas, Adobe Audition, ProTools (PC).



Nice toys to play with, but they also do some serious music recording when desired.



Frank F

[johnbailey]

RE20 --> Symetrix 528 --> Edirol UA-5 --> Dell PC running Windows XP.



The UA-5 is a USB sound card like the MBox, but it's cheaper.
_________________
John Bailey Voiceovers

[Charlie Channel]

Primary: simple DAW.



RODE NTK -> Digidesign 002-Rack -> Medion WinTel box - > BX5 monitors.

Insert: Antares AMM-1 microphone modeler between mic and sound card, sometimes. Mic's inside a Vocal Booth soundbooth.



Shure SM-58 used, sometimes for quick demo's.



Oh, yea. I forgot. Secondary (portable):



RODE NT-1000/Shure SM-58 -> BOSS BR 532 -> iMic -> USB into anything (iMac/X or BR 532 and optical output into whatever has an optical input.



For fail-safe redundancy, I use a Tascam CDRW-4U (stand-alone CD-R burning in real-time) with the primary or secondary systems. If I need to use only the BOSS BR 532 and the Tascam, a regular CD is burned, enabling me to load on any computer and convert to WAV or MP3.

[Jim Barton]

Rode NTK mic, into HHB Radius 40 preamp/compressor, into PowerMac G3 with ProTools Digi 001. I use an RE20 for high intensity spots, but don't like the dynamic hum I get. Everything gets sent through WAVES L1 Ultramaximizer before it leaves the Mac.



Jim

[Chuck Davis]

Apex 430 into ART tube channel, insert DBX 266XL as a light gate after the pre, back into the tube channel and out to Behringer MX1604A and into Pro-Tools on PC (v 6.1.1 on AMIII).



Upgrading the mix and proc this year for sure.

[Joe Whistler]