VO-BB - 19 YEARS OLD!

NorthEndVoice · Posted: Sat Jan 21, 2017 8:27 pm Post subject: Musicam Roadrunner setup

I just picked up a Roadrunner as a backup to the Xstream and cannot get it
configured (for whatever reason). Obvious settings have been double checked. SPIDs entered properly, etc. I've been through the manual step by step and it still won't function. Also only displays what appears to be Line 2 (L2) on the LCD display. I would think both lines would display (L1/L2). I'm probably missing something simple so I thought I'd see if anyone has an idea.

Quicksilver · Been Here Awhile Joined: 29 Oct 2012 Posts: 217

Call Dave Immer - http://www.digifon.com/ScienceSection.html

He is the ISDN wizard and will have your sorted in 10 minutes without any heartburn.

NorthEndVoice · Posted: Mon Jan 23, 2017 1:58 pm Post subject:

I've talked with Dave many times about many different subjects. He's great.I was just wondering if anyone had actually gone through the setup and had an issue. I've set up Telos products many times but not Musicam. I'm sure it's a configuration issue. Being older units, the menu is a bit weird. PLus the SPID input requirements are finicky too.

Lee Gordon · Posted: Mon Jan 23, 2017 2:29 pm Post subject:

It's been a few years since I set up my Roadrunner and there's no way I could remember enough to give you any useful guidance. I do, however, vaguely recall thinking I wasn't doing it right (possibly because the display showed only one number at a time), but when I was done, it worked OK.
_________________
Lee Gordon, O.A.V.
Voice President of the United States
www.leegordonproductions.com
Twitter: @LeeGordonVoice

NorthEndVoice · Posted: Wed Feb 01, 2017 6:02 pm Post subject:

Found it. As I thought...simple config issue on my part. I wasn't used to the menu and overlooked a setting. When all else fails....RTFM.